The automation of long workpieces welding (beams, wagons, box section constructions) requires sophisticated machines which move on rails.
BEAM-MATIC system is used to weld beams of constant or varying cross-section in widths between 220 and 2 000 mm (other dimensions on request).
2 types of BEAM-MATIC are available:
- Cantilever: CT,
- On base column and boom: LM.
The BEAM-MATIC allows to weld in MIG-MAG or SAW (single or twin wire) process. In standard, the machine is equipped with a flux recovery device and a pushed flux supply.
Possibility to use wire spools or wire drums on the 2 BEAM-MATIC.
The torch level is fix on the
BEAM-MATIC CT and it’s possible to lift the torch level on the
BEAM-MATIC CT (left) | BEAM-MATIC LM (right)
The clamping bench allows the positioning of the web and the flanges before the welding, with an additional clamping bench it’s possible to save time and increase productivity.
Control command: numerical control through the PLC with HMI and tactil screen.