Kent Vick built the frame for this attractive fire pit using 1-1/4 inch square tubing. The legs were made from 4 x 4 inch square tubing. The lid and ash pan were made from 12 and 14 gauge sheet metal.Ceramic tile was used for the shelf around the circumference of the fire pit.Kent turned to his Lincoln Electric POWER MIG® 180C wire feeder welder and .025 SuperArc® L-56 MIG wire to accomplish the project.
*The above project images and descriptions have been published to show how individuals used their ingenuity for their own needs, convenience and enjoyment. Only limited details are available and the projects have NOT been engineered by the Lincoln Electric Company. Therefore, when you use the ideas for projects of your own, you must develop your own details and plans and the safety and performance of your work is your responsibility.