Engine Driven Weldersview all
Ranger® 260MPX™ Welder/Generator Engine Drive (Kohler®)
MSRP: $6,368.70
Where To Buy

Top Features

  • Compact Size
  • Low Decibel Rating
  • Easy-to-Use Digital User Interface
  • Clean AC Generator Power
  • You can rent this equipment from these Rental Equipment Companies


Stick, TIG, MIG, Flux-Cored
Input ModeInput Polarity
Fuel Type
Features and Benefits

The Ranger® 260MPX™ engine driven welder/generator excels on the job. The unit’s industry-leading design makes it smaller, lighter and quieter than other machines in its class, while an intuitive user interface with advanced technology helps simplify operation and improve arc control. You can also count on a reliable source of clean generator power to run a variety of tools and sensitive equipment.
Check out the features below:

Industry-Leading Design
The Ranger 260MPX welder/generator is smaller and quieter compared to other machines in its class.

  • Up to 20% smaller - more space for additional tools
  • Up to 25% lighter - easy maneuverability around the jobsite
  • Up to 60% quieter - reduced noise level helps enhance safety and comfort

Innovative User-Interface + Advanced Technology

  • Easy-to-read digital screen with simple push-and-turn controls
  • Ready.Set.Weld® technology simplifies setup with recommended settings
  • The Chopper Technology® feature helps improve arc control
  • CrossLinc® remote technology allows for arc adjustments at the weld
  • Maintenance alerts keep you informed when service is needed

Clean Generator Power

  • 9.5kW of clean AC generator power accomodates a variety of tools and equipment
  • Operate sensitive electronics, like laptops, without concern - this unit delivers clean generator power with 5% Total Harmonic Distortion
  • Run generator power and weld at the same time, without interruption
Rated Output
  • 260A/26V/100%
Output Range
  • NON-IEC Rating:
  • Maximum Output:
  • 260A/26V/100%
  • IEC Rating:
  • DC Stick:
  • 231A/29.2V/100%
  • DC TIG:
  • 260A/20.4V/100%
  • DC Constant Voltage:
  • 253A/26.7V/100%
Generator Output
  • 10000 watts peak, 9500 watts continuous
Type of Engine
  • Kohler OHV Command CH730 Gasoline
HP and speed
  • 23.5@3600
  • 2
Dimensions (H x W x D) 26 in x 20 in x 36 in (660 mm x 508 mm x 914 mm)
Net Weight 446.00 (202.31 kg)
Key Controls

An easy-to-use digital interface with simple push-and-turn controls, combined with technology designed for quick setup and improved arc control, enables you to get started in no time.

1. Amps
2. Fuel Gauge
3. Weld Mode
4. Home Button
5. Local/Remote Button
6. Output
7. Ready.Set.Weld. Parameters
8. Back Button
9. Help Button

1. Digital User Interface
2. Engine Choke Control
4. 120/240 Volt AC Full KVA Receptacle
5. Output Studs
6. Front battery access for easy maintenance
7. Engine Start Switch
8. Scroll Knob
9. 240 Volt AC Receptacles
10. Ground Stud
11. 120 Volt AC Receptacles
12. Galvanized base to increase the life of the machine and help prevent rusting
13. Strain relief shackles for improved life on cables

14. 6pin connector for easy to connect remote control operations, or foot or hand amptrol
15. Circuit Breakers
16. 7 pin connector for the first in class direct connect spool gun

More Information

You can rent this equipment from theseRental Equipment Companies

Product Number
Product Name
Small Two-Wheel Road Trailer with Duo-Hitch
Plasma Cutter
Tomahawk® 1000 Plasma Cutter with Hand Torch
Kohler® Tune Up Kit (CH23S/CH730/ECH740)
Spool Gun
Magnum® PRO 250LX GT
Ballistic Nylon Cover
Factory Undercarriage With Pneumatic Tires
All-Terrain Undercarriage With Pneumatic Tires
Magnum PRO 250LX GT Cable Extension
Spark Arrestor Kit
Cool Arc® 47 TIG Torch Cooler - Aspect® 375
Wireless Pedal for TIG Welding
CrossLinc® Remote
Accessory Kit - 400 Amp
Remote Output Control 6 Pin - 100 ft. (30.5 m)
Foot Amptrol™ - 25 ft. (7.6m) (6 pin)
Hand Amptrol™ Rotary Track Style 25 ft (7.6m) (6-Pin)
Wire Feeders
Product Number
Product Name
Activ8X ™ Wire Feeder
LN-25X (No Flowmeter, Tweco®)
LN-25X w/(with Flowmeter,Tweco®)
Power Sources
Product Number
Product Name
POWER MIG® 180C MIG Welder
POWER MIG® 210 MP® Multi-Process Welder
POWER MIG® 140 MP® Multi-Process Welder
Square Wave® TIG 200 TIG Welder