Gazeboby Barry Wilson of Muleshoe, Texas

My gazebo project was commissioned by a cemetery association. The columns and handrails are made from one inch square steel tube. Two inch square steel tube was used for the roof structure. The scrolls were formed from 1/2 x 1/8 inch flat using my scroll bender. The bench seat around the inside of the gazebo was fabricated from 1-1/2 x 3 inch rectilinear tube.

My welder is a Lincoln Electric Power MIG® 140C wire feeder welder. I selected this welder model because of the infinite [continuous] voltage control. I used solid wire and CO2 shielding gas for this project.

*The above project images and descriptions have been published to show how individuals used their ingenuity for their own needs, convenience and enjoyment. Only limited details are available and the projects have NOT been engineered by the Lincoln Electric Company. Therefore, when you use the ideas for projects of your own, you must develop your own details and plans and the safety and performance of your work is your responsibility.